Temperature Management Controllers
HotDog temperature management controllers deliver low-voltage electricity to blankets and mattresses where it is converted into safe heat by the patented semi-conductive polymer fabric and managed by an advanced sensor system. There is a 3-year warranty for controllers.
NEW
WC77 Temperature Management Controller
Multiport
7″ Touchscreen Display
Controls up to four Warming Blankets and one Warming Mattress
Temperature Monitoring*
Integrated Slide Shows
Positioning Guides
IV Pole Clamp
VESA Mount Compatible
Integrated Self Testing
Weight – 7.1 lb
NEW
WC71 Temperature Management Controller
Single Port
7″ Touchscreen Display
Controls one Warming Blanket
Temperature Monitoring*
Integrated Slide Shows
Positioning Guides
IV Pole Clamp
VESA Mount Compatible
Integrated Self Testing
Weight – 6.4 lb
WC7X Specifications
Dimensions | 11” high x 7” deep x 8.75” wide (28 cm H x 17.8 cm D x 22.2 cm W) |
Weight | 6.4 – 8.3 lbs (2.9 – 3.75 kg) excluding clamp |
Mounting | Can be placed on a horizontal flat surface (i.e. table top), clamped to an IV pole, or hung using a VESA mount of either FDMI MIS-C (35 × 75 mm) or FDMI MIS-D (75 × 75 mm) specifications |
Temperature Control | Micro-processor |
Blanket Operating Temperatures | Blanket Ports A adjustable in 1oC increments 37° to 43° ± 1.0°C (98.6° to 109.4° ± 1.8°F) |
Mattress Operating Temperature | Mattress Port M adjustable in 1oC increments 35° to 40° ± 1.0°C (95° to 104° ± 1.8°F) |
Device Ratings | Input: 100-240 VAC, 50/60 Hz, 850VA Output A, B, C, D: 48 VDC, 480 VA Max each Output M: 336 VA Max |
Leakage Current | Meets UL 60601-1 and IEC 60601-1 requirements for Class I, Type BF equipment. |
Power Consumption | 850W maximum (during warm-up with all ports occupied) |
Certifications | IEC 60601-1; EN 60601-1-2; UL 60601-1; CAN/CSA-C22.2, No. 601.1, EN 55011 |
Additional Specifications available in the WC7X Spec Sheet (M134)